Basic circuits  [t-head1]

The easy circuit configuration is input in ladder diagram. This section includes a few circuit examples which are intended to demonstrate the possibilities for your own circuit diagrams.

The values in the logic table have the following meanings for switching contacts:

0 = N/O contact open, N/C contact closed
1 = N/O contact closed, N/C contact open

For relay coils Qx”

0 = Coil not energized
1 = Coil energized

Note
The examples shown are based on easy500 and easy700. easy800 and MFD…CP8… provide four contacts and one coil per rung.