Display text and actual values , display and edit set values [t-head1-pg]

easy500 and easy700 can display 16, easy800 can display 32 freely editable texts. These texts can be triggered by the actual values of function relays such as timing relays, counters, operating hours counters, analog value comparators, date, time or scaled analog values. The setpoints of timing relays, counters, operating hours counters, analog value comparators can be modified when the text is displayed.

Example of a text display:

The text display can display the following:

The text output unit D (D = Display) functions in the circuit diagram like a normal marker M. Should a text be attached to a marker this would be shown at condition 1 of the coil in the easy display. A precondition is that the easy is in RUN mode and before the texts are displayed the status display is shown.

D1 is defined as alarm text and has therefore priority over other displays.

D2 to D16/D32 are displayed when activated. When several displays are activated they are shown one after the other every 4 seconds. When a set value is edited the corresponding display remains shown until the value transfer.

Several values, such as actual and setpoint values from function relays, analog input values or time and date can be incorporated. The set values can be edited: