Moeller - Engineering easy - Input/output expansion easy

Input/output expansion [t-head1-pg]

Central expansion, up to 40 I/O [t-head3]

easy700, easy800, MFD(-AC)-CP8… as well as EC4P-200 can be expanded with easy202, easy410, easy618 or easy620. This provides you with up to 24 inputs and 16 outputs. One expansion device per basic unit is possible, → section Central and remote expansion easy .

Remote expansion, up to 40 I/O [t-head3]

easy700, easy800, EC4P-200 and MFD-Titan are expanded with easy410, easy618 or easy620 using the EASY200-EASY coupling module. The expansion device can be operated up to 30 m from the basic device. There are a maximum of 24 inputs and 16 outputs available. One expansion device per basic unit is possible, → section Central and remote expansion easy .

Networking via Net, up to 320 I/O [t-head3]

Up to eight stations can be interconnected by expanding the inputs and outputs via easyNet. An expansion device can be added to each easy800, MFD(-AC)-CP8… or EC4P-200. A network length of up to 1 000 m is possible. There are two types of operation:

A master (position 1, station address 1) and up to 7 other stations. The program is contained in the master.

A master (space 1, station address 1) and up to 7 other “intelligent” or “dumb” stations. Each “intelligent” station has a program.

→ section easy Net, “loop through the device” network connection

Networking via CANopen (Control) [t-head3-col]

easyControl makes it possible to create networks via CANopen. For this the digital or analog I/O expansion modules EC4E… can be used. Another easy expansion module can be then connected to this (e.g. easy410, easy618, easy620). Observe the CANopen specification!

→ section Network connection, CANopen