Sheet steel wall-mounting enclosure CS [t-head1-pg]

With mounting plate [t-head2-nnp]

45 enclosure sizes are available for selection from 250 × 200 × 150 to 1200 × 1200 × 250 mm.

The stable CS enclosure series made from solid sheet steel is used in applications wherever effective protection against the direct contact of live parts is required.

The high IP55 degree of protection allows installed equipment to be protected from most harmful ambient conditions.

A continuous sponge polyurethane seal provides the necessary seal tightness. The surrounding rain channel profile offers protection against the ingress of liquid such as water or oil as well as dirt when the door is opened.

The classification of impact resistance code IK10 to EN 62262 also protects the inside of the cabinet from mechanical damage.

CS enclosures can be mounted as wall enclosures.

Their powder coated surface provides an abrasion and corrosion resistant protection.

The enclosure door can be removed easily for other mechanical measures. Inside hinges that are covered can thus be undone simply and the door stop exchanged from right to left or vice versa.

Moeller can also provide customised solutions on request. This includes for example: